Jotun Marathon 1000 GF
Jotun Marathon 1000 is a two component polyamine cured epoxy coating. It is a high build, solvent free, glass flake reinforced product. It has very good impact and abrasion resistance. Suitable for environments with very high corrosivity, such as areas in the splash or tidal zone. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel substrates.
For free technical advice or if you have any other questions, please do not hesitate to call us on 01933 426225 or email email@example.com. Alternatively, use our enquiry form and we will respond shortly
Suitable for structural steel and piping to be exposed to corrosive environments up to very high and immersed. Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel. Specially suited in areas where high mechanical strength is required, such as splash or tidal zones. Can be used as a non-slip deck system in combination with appropriate Anti-Skid aggregate and finish coat. Compatible with cathodic protection systems.
Approvals and certificates:
NORSOK Standard M-501, Edition 6, Coating system no. 1 – Carbon steel with maximum operating temperature <120 °C
NORSOK Standard M-501, Edition 6, Coating system no. 4 – Walkways, escape routes and lay down areas
NORSOK Standard M-501, Edition 6, Coating system no. 7A – Carbon and stainless steel in the splash zone
Additional certificates and approvals may be available on request.
Selected range of colours.
For free technical advice or if you have any other questions, please do not hesitate to call us on 01933 426225 or email firstname.lastname@example.org. Alternatively, use our enquiry form below and we will respond shortly.